[DEFAULT] bind_ip = 0.0.0.0 bind_port = 6612 # keep_idle = 600 # bind_timeout = 30 # backlog = 4096 user = ubuntu swift_dir = /etc/swift devices = /opt/stack/data/swift/1 mount_check = false disable_fallocate = true # # Use an integer to override the number of pre-forked processes that will # accept connections. workers = 2 # # Maximum concurrent requests per worker # max_clients = 1024 # # You can specify default log routing here if you want: # log_name = swift log_facility = LOG_LOCAL0 # log_level = INFO # log_address = /dev/log # The following caps the length of log lines to the value given; no limit if # set to 0, the default. # log_max_line_length = 0 # # Hashing algorithm for log anonymization. Must be one of algorithms supported # by Python's hashlib. # log_anonymization_method = MD5 # # Salt added during log anonymization # log_anonymization_salt = # # Template used to format logs. All words surrounded by curly brackets # will be substituted with the appropriate values # log_format = {remote_addr} - - [{time.d}/{time.b}/{time.Y}:{time.H}:{time.M}:{time.S} +0000] "{method} {path}" {status} {content_length} "{referer}" "{txn_id}" "{user_agent}" {trans_time:.4f} "{additional_info}" {pid} {policy_index} # # comma separated list of functions to call to setup custom log handlers. # functions get passed: conf, name, log_to_console, log_route, fmt, logger, # adapted_logger # log_custom_handlers = # # If set, log_udp_host will override log_address # log_udp_host = # log_udp_port = 514 # # You can enable StatsD logging here: # log_statsd_host = # log_statsd_port = 8125 # log_statsd_default_sample_rate = 1.0 # log_statsd_sample_rate_factor = 1.0 # log_statsd_metric_prefix = # # If you don't mind the extra disk space usage in overhead, you can turn this # on to preallocate disk space with SQLite databases to decrease fragmentation. # db_preallocation = off # # Enable this option to log all sqlite3 queries (requires python >=3.3) # db_query_logging = off # # eventlet_debug = false # # You can set fallocate_reserve to the number of bytes or percentage of disk # space you'd like fallocate to reserve, whether there is space for the given # file size or not. Percentage will be used if the value ends with a '%'. # fallocate_reserve = 1% # # You can set scheduling priority of processes. Niceness values range from -20 # (most favorable to the process) to 19 (least favorable to the process). # nice_priority = # # You can set I/O scheduling class and priority of processes. I/O niceness # class values are IOPRIO_CLASS_RT (realtime), IOPRIO_CLASS_BE (best-effort) and # IOPRIO_CLASS_IDLE (idle). I/O niceness priority is a number which goes from # 0 to 7. The higher the value, the lower the I/O priority of the process. # Work only with ionice_class. # ionice_class = # ionice_priority = [pipeline:main] pipeline = healthcheck recon account-server [app:account-server] use = egg:swift#account # You can override the default log routing for this app here: # set log_name = account-server # set log_facility = LOG_LOCAL0 # set log_level = INFO # set log_requests = true # set log_address = /dev/log # # You can disable REPLICATE handling (default is to allow it). When deploying # a cluster with a separate replication network, you'll want multiple # account-server processes running: one for client-driven traffic and another # for replication traffic. The server handling client-driven traffic may set # this to false. If there is only one account-server process, leave this as # true. # replication_server = true # # You can set scheduling priority of processes. Niceness values range from -20 # (most favorable to the process) to 19 (least favorable to the process). # nice_priority = # # You can set I/O scheduling class and priority of processes. I/O niceness # class values are IOPRIO_CLASS_RT (realtime), IOPRIO_CLASS_BE (best-effort) and # IOPRIO_CLASS_IDLE (idle). I/O niceness priority is a number which goes from # 0 to 7. The higher the value, the lower the I/O priority of the process. # Work only with ionice_class. # ionice_class = # ionice_priority = # # You can set fallocate_reserve to the number of bytes or percentage # of disk space you'd like kept free at all times. If the disk's free # space falls below this value, then PUT, POST, and REPLICATE requests # will be denied until the disk ha s more space available. Percentage # will be used if the value ends with a '%'. # fallocate_reserve = 1% [filter:healthcheck] use = egg:swift#healthcheck # An optional filesystem path, which if present, will cause the healthcheck # URL to return "503 Service Unavailable" with a body of "DISABLED BY FILE" # disable_path = [filter:recon] use = egg:swift#recon recon_cache_path = /opt/stack/data/swift/cache [account-replicator] vm_test_mode = yes # You can override the default log routing for this app here (don't use set!): # log_name = account-replicator # log_facility = LOG_LOCAL0 # log_level = INFO # log_address = /dev/log # # Maximum number of database rows that will be sync'd in a single HTTP # replication request. Databases with less than or equal to this number of # differing rows will always be sync'd using an HTTP replication request rather # than using rsync. # per_diff = 1000 # # Maximum number of HTTP replication requests attempted on each replication # pass for any one container. This caps how long the replicator will spend # trying to sync a given database per pass so the other databases don't get # starved. # max_diffs = 100 # # Number of replication workers to spawn. # concurrency = 8 # # Time in seconds to wait between replication passes # interval = 30 # run_pause is deprecated, use interval instead # run_pause = 30 # # Process at most this many databases per second # databases_per_second = 50 # # node_timeout = 10 # conn_timeout = 0.5 # # The replicator also performs reclamation # reclaim_age = 604800 # # Allow rsync to compress data which is transmitted to destination node # during sync. However, this is applicable only when destination node is in # a different region than the local one. # rsync_compress = no # # Format of the rsync module where the replicator will send data. See # etc/rsyncd.conf-sample for some usage examples. # rsync_module = {replication_ip}::account # recon_cache_path = /opt/stack/data/swift/cache # # You can set scheduling priority of processes. Niceness values range from -20 # (most favorable to the process) to 19 (least favorable to the process). # nice_priority = # # You can set I/O scheduling class and priority of processes. I/O niceness # class values are IOPRIO_CLASS_RT (realtime), IOPRIO_CLASS_BE (best-effort) and # IOPRIO_CLASS_IDLE (idle). I/O niceness priority is a number which goes from # 0 to 7. The higher the value, the lower the I/O priority of the process. # Work only with ionice_class. # ionice_class = # ionice_priority = # # The handoffs_only mode option is for special-case emergency # situations such as full disks in the cluster. This option SHOULD NOT # BE ENABLED except in emergencies. When handoffs_only mode is enabled # the replicator will *only* replicate from handoff nodes to primary # nodes and will not sync primary nodes with other primary nodes. # # This has two main effects: first, the replicator becomes much more # effective at removing misplaced databases, thereby freeing up disk # space at a much faster pace than normal. Second, the replicator does # not sync data between primary nodes, so out-of-sync account and # container listings will not resolve while handoffs_only is enabled. # # This mode is intended to allow operators to temporarily sacrifice # consistency in order to gain faster rebalancing, such as during a # capacity addition with nearly-full disks. It is not intended for # long-term use. # # handoffs_only = no [account-auditor] # You can override the default log routing for this app here (don't use set!): # log_name = account-auditor # log_facility = LOG_LOCAL0 # log_level = INFO # log_address = /dev/log # # Will audit each account at most once per interval # interval = 1800 # # accounts_per_second = 200 recon_cache_path = /opt/stack/data/swift/cache # # You can set scheduling priority of processes. Niceness values range from -20 # (most favorable to the process) to 19 (least favorable to the process). # nice_priority = # # You can set I/O scheduling class and priority of processes. I/O niceness # class values are IOPRIO_CLASS_RT (realtime), IOPRIO_CLASS_BE (best-effort) and # IOPRIO_CLASS_IDLE (idle). I/O niceness priority is a number which goes from # 0 to 7. The higher the value, the lower the I/O priority of the process. # Work only with ionice_class. # ionice_class = # ionice_priority = [account-reaper] # You can override the default log routing for this app here (don't use set!): # log_name = account-reaper # log_facility = LOG_LOCAL0 # log_level = INFO # log_address = /dev/log # # concurrency = 25 # interval = 3600 # node_timeout = 10 # conn_timeout = 0.5 # # Normally, the reaper begins deleting account information for deleted accounts # immediately; you can set this to delay its work however. The value is in # seconds; 2592000 = 30 days for example. The sum of this value and the # container-updater interval should be less than the account-replicator # reclaim_age. This ensures that once the account-reaper has deleted a # container there is sufficient time for the container-updater to report to the # account before the account DB is removed. # delay_reaping = 0 # # If the account fails to be reaped due to a persistent error, the # account reaper will log a message such as: # Account has not been reaped since # You can search logs for this message if space is not being reclaimed # after you delete account(s). # Default is 2592000 seconds (30 days). This is in addition to any time # requested by delay_reaping. # reap_warn_after = 2592000 # # You can set scheduling priority of processes. Niceness values range from -20 # (most favorable to the process) to 19 (least favorable to the process). # nice_priority = # # You can set I/O scheduling class and priority of processes. I/O niceness # class values are IOPRIO_CLASS_RT (realtime), IOPRIO_CLASS_BE (best-effort) and # IOPRIO_CLASS_IDLE (idle). I/O niceness priority is a number which goes from # 0 to 7. The higher the value, the lower the I/O priority of the process. # Work only with ionice_class. # ionice_class = # ionice_priority = # Note: Put it at the beginning of the pipeline to profile all middleware. But # it is safer to put this after healthcheck. [filter:xprofile] use = egg:swift#xprofile # This option enable you to switch profilers which should inherit from python # standard profiler. Currently the supported value can be 'cProfile', # 'eventlet.green.profile' etc. # profile_module = eventlet.green.profile # # This prefix will be used to combine process ID and timestamp to name the # profile data file. Make sure the executing user has permission to write # into this path (missing path segments will be created, if necessary). # If you enable profiling in more than one type of daemon, you must override # it with an unique value like: /var/log/swift/profile/account.profile # log_filename_prefix = /tmp/log/swift/profile/default.profile # # the profile data will be dumped to local disk based on above naming rule # in this interval. # dump_interval = 5.0 # # Be careful, this option will enable profiler to dump data into the file with # time stamp which means there will be lots of files piled up in the directory. # dump_timestamp = false # # This is the path of the URL to access the mini web UI. # path = /__profile__ # # Clear the data when the wsgi server shutdown. # flush_at_shutdown = false # # unwind the iterator of applications # unwind = false